You can update your Land Rover vehicle through your Pivi Pro system. Updates to your vehicle will provide you with the latest features and ensure the utmost stability across all areas of your vehicle, including the engine, transmission, interior electronics, and infotainment systems. Some recall software updates are now also able to be performed over the air.
Once the update is fully downloaded to the vehicle and ready to install, a notification icon will show the update is available with a “learn more” link to take you to the software update settings screen.
You will also receive a pop-up notification at ignition off to ask you to accept the update.
After accepting the update, you will be asked to either “Update Now” or “Schedule”.
Ensure the vehicle is in a good network coverage area (Wi-Fi or Mobile data).
If you wish to schedule the update, press Schedule, select the date, time and press OK. Otherwise press ‘Update Now”.
Before updating close all windows, lock and arm the vehicle. Leave the vehicle for the period of time presented in the pop-up notification.
If update now is selected the vehicle will wait 10 minutes before starting the update process. Starting the vehicle in this period will cancel this update attempt. When scheduled, the car will start the update at the scheduled time.
The vehicle will perform safety checks before applying the update, including, but not limited to:
If any conditions are not satisfied the update will not proceed. The software update screen will provide guidance on how to remedy this before another attempt.
If all conditions are satisfied, the vehicle will then initiate the update.
During the update you will not be able to use the vehicle. This can last between 30-90 mins. Most vehicle systems are unavailable during the update, but you will be able to unlock/lock and access the vehicle. For vehicles with pop-out door handles please see the owner’s manual for how to operate them.
On returning to your vehicle, all systems on your vehicle will start up with new software. A notification will inform you of a successful update, the software update screen will show the new version number as well as release note text explaining all changes and improvements.
Nothing is wrong, this screen remains blank until you receive your first Software Over The Air (SOTA) update – any updates completed in the retailer are not reflected on this screen.
New vehicles need to connect to our servers and hand back software versions of all ECUs, this will prompt them to be included in the next update wave if an update is required.
No, all vehicles must complete software updates in order, this is due to the fact we can update most modules in your vehicle. Each release is dependent on the previous releases to ensure system stability and compatibility.
After an update, there may be a delay before your vehicle receives the next release as they are queued into batches.
12V – For some larger updates we require the 12V battery to be charged to a high level, if this issue occurs, please drive your vehicle for a longer period before reattempting the update to give the vehicle time to recharge the 12V battery.
The preconditions are used to ensure the updates are only attempted when the vehicle is in a safe state.
During the update all SOTA components support one of the following safety mechanisms:
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
This update prepares systems for upcoming feature and performance enhancements.
This update also brings improvements to the following features and systems:
This update prepares systems for upcoming feature and performance enhancements.
This update also brings improvements to the following features and systems:
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers.
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
Drivetrain:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
Drivetrain:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
Drivetrain:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
Drivetrain:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
This update also brings improvements to the following features and systems:
Drivetrain:
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update prepares the system for upcoming features and performance enhancements.
With our continued drive to deliver improvements to your vehicle, this update brings enhancements to the following systems:
High Voltage (HV) Battery Charge Control:
Changes to the control of the charging cable locking pin to reduce the possibility of an unresponsive locking pin.
Changes to the charge indicator LED behaviour
Sound System:
General calibration & system volume refinements including a fix for an issue where the audio could be heard through an incorrect speaker channel.
ABS (Anti-Lock Braking System):
Vehicles without Surround Cameras:
Added automatic display of the rear view when the vehicle rolls back plus other general performance improvements.
Powertrain:
PHEV Vehicles fitted with Belt Integrated Starters:
Resolved an issue that could result in a delayed engine start.
V8 Engine Defenders:
Improvements to oil monitoring systems.
Jaguar I-PACE (21MY Only – already included in later models):
Improvements to cold weather range prediction accuracy.
Improved support for Charge Now.
Fixed Time charging now works across multiple days.
Improved range estimation for vehicles fitted with 20" wheels.
Improved range estimation impact influenced by the vehicle’s climate control system.
Range estimation updates more frequently, preventing unexpected range drop off at lower range values.
Defender and Discovery 6-cylinder vehicles:
Resolved an issue where the O2 sensor could incorrectly result in the display of an engine warning light.
All other vehicles:
General powertrain refinements.
In this release our Driving Assistance and Vehicle Dynamics teams have created a number of improvements to the performance of a number of vehicle control systems and consequently enhanced the vehicle's refinement.
Adaptive Cruise Control with Steering Assist / Lane Keep Assist (Please note: Not all of the below improvements are applicable to vehicles with only Lane Keep Assist):
Smoother assisted steering for road layouts which include direction changes, lanes splitting and road marking transitions.
Image processing improvements for surface estimation.
Calibration updates improving lane corridor quality & consistency, resulting in smoother steering through corners.
Improved determination of road edges.
Several line geometry related image processing refinements to help avoid false positives.
Improvements when managing cross junctions with no lane markings.
Emergency Braking:
General performance refinements.
Traffic Sign Recognition:
General improvement in sign recognition.
All models
IMPORTANT – CHANGES TO PROFILES
Markets where InControl Accounts are supported:
To provide greater flexibility and opportunity in future updates, it’s been necessary to redevelop Profiles (referred to as Accounts after the update).
Please Note: Only personal settings and navigation destinations as part of a Profile linked to a signed in InControl Account PRIOR to this update will be preserved. Profiles not linked to a signed in InControl Account will need to be recreated after the update.
Markets where InControl Accounts are not supported:
Profiles will no longer be supported following this update and therefore personal profiles will no longer be accessible. We apologise for any inconvenience these changes may cause. This update brings a number of significant new features as follows:
New features
Features we’ve improved or changed
Please Note: Availability of features can vary by vehicle specification, model year and market.
Enhanced High Voltage battery cell (primary battery) health monitoring/management. This is a required update and forms the delivery of the recall remedy for safety recall H441.
IMPORTANT – CHANGES TO PROFILES
Markets where InControl Accounts are supported: To provide greater flexibility and opportunity in future updates, it’s been necessary to redevelop Profiles (referred to as Accounts after the update).
Please Note: Only personal settings and navigation destinations as part of a Profile linked to a signed in InControl Account PRIOR to this update will be preserved.
Profiles not linked to a signed in InControl Account will need to be recreated after the update. Markets where InControl Accounts are not supported: Profiles will no longer be supported following this update and therefore personal profiles will no longer be accessible.
We apologise for any inconvenience these changes may cause. This update brings a number of significant new features as follows:
New features
Features we’ve improved or changed
Please Note: Availability of features can vary by vehicle specification, model year and market.
H473 Diesel Exhaust Fluid System Operation – Update (X760 24MY Only):
A number of vehicles require an update to ensure the DEF (Diesel Exhaust Fluid - sometimes called AdBlu) system functions as expected when the DEF level is depleted. This update ensures a restart is not possible once the DEF is fully depleted and the final warning of no DEF is displayed until the DEF is replenished sufficiently.
N867 Diesel Exhaust Fluid System Operation – Update (L560 24MY Only):
A number of vehicles require an update to ensure the DEF (Diesel Exhaust Fluid - sometimes called AdBlu) system functions as expected when the DEF level is depleted. This update ensures a restart is not possible once the DEF is fully depleted and the final warning of no DEF is displayed until the DEF is replenished sufficiently.
Please note: Once this update has been performed it will not be necessary to contact your retailer for the above described issue.
For further information, please refer to the official recall bulletin ‘H473/ N867’ for all recall related information.
N810 - Headlamp Inoperative Recall Update
During ongoing quality assessment and improvement of our Range Rover and Range Rover Sport vehicles, a potential issue has been identified which could result in one or both headlamps becoming inoperative.
This important software update for the Headlamp Control Modules prevents the possibility of such an issue arising and therefore it is highly recommended to allow this update as soon as possible.
Please note: Once this update has been performed it will not be necessary to contact your retailer for the above described issue.
For further information, please refer to the official recall bulletin N810 for all recall related information.
*Future update will enable BEV vehicles to update while on charge